DUST EXTRACTOR

THE DUST EXTRACTOR IS  MADE UP  OF STAINLESS STEEL.

the machine is complete with a COMPRESSED AIR TANK with solenoid valves for filter cleaning.

There is a dust extraction fan, a fan chimney and a fan base.

The filter consists of a metal box separated into two sections, one of the access of the dusty air, the other of the exhaust of clean air.

Both the inlet of the air to be purified, and the outlet of the purified air are placed at the top.

The filter inlet chimney has a section of 500 mm x 300 mm.

Between the inlet and outlet sections there are specific cartridges for the abatement of the part containing quartz.

Their cleaning is guaranteed by a compressed air blowing system by means of an electric sequencer mounted on the panel.

The purifier air enters the filter, coming from inside the plant, through two vents placed in position exactly mirror each other.

Once inside the filtering box the air, after a first abrupt change of direction , in which there is the detachment of the fluid current of the coarser fraction , passes through the pleats of the cartridges on which it deposits the remaining portion of particulate matter , once released of its polluting load , the air flows through a fan and from this by means of suitable flushing chimneys at 1 m above the roof and flows into the atmosphere.

As it has been conceived, the system has a wide autonomy, it is self-cleaning and necessary only to wash the filters with water every year and replace them with a predictable average frequency of three years.

It should be noted that the system must be equipped with a permit for the discharge of fumes into the atmosphere and that this authorization is prior to the installation of the system.